Brocade Communications Systems StoreFabric SN6500B Reference page 234

5
CDR-1017
CDR-1017
Message
Blade in Slot <slot number> faulted due to unavailable ports in internal Trunk.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified blade is faulted due to unavailable ports in internal trunk.
Recommended
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
Action slotPowerOn commands. If the problem persists, replace the blade.
CDR-1018
Message
Blade in Slot <slot number> faulted due to Link reset threshold value exceeded.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified blade is faulted because the link reset threshold is exceeded.
Recommended
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
Action slotPowerOn commands. If the problem persists, replace the blade.
CDR-1019
Message
S<slot number>,C<chip index>: HW ASIC Chip TXQ FID parity error threshold reached
type = 0x<chip error type>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware
that may degrade the data traffic.
Recommended
Restart the system at the next maintenance window.
Action
212
Fabric OS Message Reference
53-1002749-01