Brocade Communications Systems StoreFabric SN6500B Reference page 654

5
NS-1010
NS-1010
Message
CSCTL mode enabled on port <csctlport> QoS zoning will be ignored for devices on
this port.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that class-specific control (CS_CTL) mode has been enabled on the specified port that has
devices as members of a quality of service (QoS) zone.
Recommended
Remove the CS_CTL configured devices from the QoS zone.
Action
NS-1011
Message
NS has detected a failover flag disabled TI zone in a base switch <Domain Id> in
fabric ID <Fabric ID>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a failover-disabled traffic isolation (TI) zone has been detected in a base switch fabric.
Recommended
Enable the failover flag or remove the TI zone with the disabled failover flag because the routing may not
Action be set up correctly.
NS-1012
Message
Detected duplicate WWPN [<WWPN>] - devices removed with PID 0x<existing device
PID> and 0x<new device PID>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the devices with the same World Wide Port Name (WWPN) have been removed from the
Name Server database.
Recommended
Verify the device reported with duplicate WWPN.
Action
632
Fabric OS Message Reference
53-1002749-01