Brocade Communications Systems StoreFabric SN6500B Reference page 774

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

5
SEC-1339
SEC-1339
Message
Distribute command failed. There are Inflight encryption enabled switch(s) in
fabric. Auth db(s) distribution is blocked
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates there was an attempt to distribute AUTH databases with switch policy (Off/Passive) from the
fabric to a switch that has Inflight Encryption enabled
Recommended
Disable or enable Inflight encryption in all the switches in the fabric
Action
SEC-3001
Message
Event: <Event Name>, Status: success, Info: Security mode <State change: Enabled
or Disabled> on the fabric.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the security mode of the fabric was either enabled or disabled.
Recommended
Verify the security event was planned. If the security event was planned, no action is required. If the
Action
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3002
Message
Event: <Event Name>, Status: success, Info: <Event Related Info>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified security event has occurred. The event can be one of the following:
752
There has been a fabric configuration server (FCS) failover.
A security policy has been activated.
A security policy has been saved.
A security policy has been aborted.
A non-FCS password has changed.
Fabric OS Message Reference
53-1002749-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.1.0

Table of Contents