Brocade Communications Systems StoreFabric SN6500B Reference page 170

5
AUTH-1014
AUTH-1014
Message
Invalid port value to <operation>: port <port number>.
Message Type
LOG | FFDC
Severity
ERROR
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
Action switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1016
Message
Invalid value to start HBA authentication port: <port number>, pid <pid>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an internal failure.
Recommended
Copy the message and collect the switch information using the supportShow command, and contact
Action your switch service provider.
AUTH-1017
Message
Invalid value to start authentication request: port <port number>, operation code
<operation code>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
Action switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
148
Fabric OS Message Reference
53-1002749-01