Brocade Communications Systems StoreFabric SN6500B Reference page 706

5
RTWR-1001
RTWR Messages
RTWR-1001
Message
RTWR <routine: error message> 0x<detail 1>, 0x<detail 2>, 0x<detail 3>, 0x<detail
4>, 0x<detail 5>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an error occurred in Reliable Transport With Response (RTWR) due to one of the following
reasons:
•
•
•
•
The message contains the name of the routine that has an error and other error-specific information.
Refer to values in details 1 through 5 for more information.
Recommended
Restart the switch.
Action
RTWR-1002
Message
RTWR <error message: maximum retries exhausted> 0x<port>, 0x<domain ID>, 0x<retry
count>, 0x<status>, 0x<process ID>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that Reliable Transport With Response (RTWR) has exhausted the maximum number of retries
for sending data to the specified domain.
Recommended
Execute the fabricShow command to verify that the specified domain ID is online.
Action
If the switch with the specified domain ID is offline, enable the switch using the switchEnable command.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
684
The system ran out of memory.
The domain may be unreachable
The frame transmission failed.
An internal error or failure occurred.
Fabric OS Message Reference
53-1002749-01