Brocade Communications Systems StoreFabric SN6500B Reference page 236

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

CHS Messages

ki_gd_register_action failed with rc = <return val>.

Message Type

Probable Cause

Indicates an internal error.

To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To

recover a non-bladed system, execute the fastBoot command on the switch.

Slot ENABLED but Not Ready during recovery, disabling slot = <slot number> rval =

<return value>.

Message Type

Probable Cause

Indicates that the slot state has been detected as inconsistent during failover or recovery.

For a bladed switch, execute the slotPowerOff and slotPowerOn commands to power cycle the blade.

For a non-bladed switch, restart or power cycle the switch.

Blade attach failed during recovery, disabling slot = <slot number>, rval =

<return value>.

Message Type

Probable Cause

Indicates that the specified blade has failed during failover or recovery.

For a bladed switch, execute the slotPowerOff and slotPowerOn commands to power cycle the blade.

For a non-bladed switch, restart or power cycle the switch.

Fabric OS Message Reference

53-1002749-01

Fabric os v7.1.0