Brocade Communications Systems StoreFabric SN6500B Reference page 807

SPC-3003
Message
S<slot number containing Encryption Engine>, <module name>: No output KEK for DEK
rewrap, DEK: <DEK octet 1> <DEK octet 2> <DEK octet 3> <DEK octet 4>, KEK: <KEK
octet 1> <KEK octet 2> <KEK octet 3> <KEK octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the output wrapping key encryption key (KEK) for the data encryption key (DEK) to be
rewrapped does not exist within the encryption engine CryptoModule.
Recommended
No action is required. The KEK will be recovered automatically.
Action
SPC-3004
Message
S<slot number containing Encryption Engine>, <module name>: No output KEK for DEK
create, KEK: <KEK octet 1> <KEK octet 2> <KEK octet 3> <KEK octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the output wrapping key encryption key (KEK) for the data encryption key (DEK) to be created
does not exist within the encryption engine CryptoModule.
Recommended
For opaque key vaults such as DPM, recover the missing master key to the current or alternate position.
Action
SPC-3005
Message
S<slot number containing Encryption Engine>, <module name>: DEK inject error: <SP
status code>, DEK: <DEK octet 1 or other info> <DEK octet 2> <DEK octet 3> <DEK
octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an error in injecting data encryption key (DEK) into encryption engine. The SP status code
variable specifies the cause of the error:
•
•
•
•
Recommended
Contact your switch service provider for assistance.
Action
Fabric OS Message Reference
53-1002749-01
14 - Invalid input DEK format
32 - DEK could not be unwrapped
33 - FGPA error upon inject
73 - Invalid key encryption key (KEK) format
5
SPC-3003
785