Brocade Communications Systems StoreFabric SN6500B Reference page 760

5
SEC-1250
SEC-1250
Message
DCC enforcement API failed: <failed action> err=<status>, key=<data>
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an internal error caused the Device Connection Control (DCC) policy enforcement to fail.
Recommended
Retry the failed security command.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1251
Message
Policy to binary conversion error: <text message> <value>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the security database conversion failed because of invalid values. The reason is specified in
the text message variable and the faulty value is printed in the value variable.
Recommended
Retry the failed security command.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1253
Message
Bad DCC interface state during <Phase>, state=<state>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an internal error has caused the Device Connection Control (DCC) policy update to fail in the
provision, commit, or cancel phases.
Recommended
Retry the failed security command.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
738
Fabric OS Message Reference
53-1002749-01