Brocade Communications Systems StoreFabric SN6500B Reference page 613

L2SS-1004
Message
FDB error: Error in creating AVL tree.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Layer 2 system (L2SYS) has encountered an error while initializing the AVL tree.
Recommended
Reboot or power cycle the switch.
Action
L2SS-1005
Message
MAC-address-table hash failed even after two attempts for slot <slot> chip <chip>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the media access control (MAC) address table hash failed even after two hash changes on
the specified chip.
Recommended
Reboot or power cycle the switch.
Action
L2SS-1006
Message
MAC-address-table table on slot <Slot_id> chip <Chip_id> is 95 percent full.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended
Clear some of the entries using the no mac-address-table static command or wait until the old entries
Action age out.
Fabric OS Message Reference
53-1002749-01
5
L2SS-1004
591