Brocade Communications Systems StoreFabric SN6500B Reference page 460

5
FW-1001
FW Messages
FW-1001
Message
<label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the internal temperature of the switch has changed.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. To prevent recurring messages, disable the changed alarm for this threshold. If you receive a
temperature-related message, check for an accompanying fan-related message and check fan
performance. If all fans are functioning normally, check the climate control in your lab.
FW-1002
Message
<Label>, is below low boundary (High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the internal temperature of the switch has fallen below the low boundary.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. Typically, low temperatures mean that the fans and airflow of a switch are functioning
normally.
Verify that the location temperature is within the operational range of the switch. Refer to the hardware
reference manual for the environmental temperature range of your switch.
FW-1003
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the internal temperature of the switch has risen above the high boundary to a value that
might damage the switch.
Recommended
This message generally appears when a fan fails. If so, a fan-failure message accompanies this
Action message. Replace the fan.
438
Fabric OS Message Reference
53-1002749-01