Brocade Communications Systems StoreFabric SN6500B Reference page 201

BL-1050
Message
Incompatible Blade Processor FPGA version with FOS7.0 firmware in slot=<slot
number> on FX8-24. Contact support for upgrade instructions.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0
is incompatible on the FX8-24 blade.
Recommended
Contact your switch service provider for upgrade instructions.
Action
BL-1051
Message
Incompatible Blade Processor FPGA version with FOS7.0 firmware on 7800. Contact
support for upgrade instructions.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0
is incompatible on the Brocade 7800 switch.
Recommended
Contact your switch service provider for upgrade instructions.
Action
BL-1052
Message
Link Reset threshold exceeded in the internal port (slot <slot number>, port <port
number>). No core blade has been faulted because it has only one active core
blade.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the internal port in the core blade exceeded the link reset threshold level. Faulting the peer
edge blade because there is only one active core blade.
Recommended
Replace the core blade.
Action
Fabric OS Message Reference
53-1002749-01
5
BL-1050
179