SULB-1041
Message
Firmware has been activated successfully on standby CP.
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that the firmwareActivate command has completed successfully on the standby control
processor (CP).
Recommended
No action is required. The firmwareActivate command has completed on the standby CP as expected.
Action
Run the firmwareShow command to verify the firmware versions.
SULB-1042
Message
Firmwareactivate command has completed successfully.
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that the firmwareActivate command has completed successfully and the switch firmware has
been updated.
Recommended
No action is required. The firmwareActivate command has completed as expected.
Action
Run the firmwareShow command to verify the firmware versions.
SULB-1043
Message
Firmwareactivate command failed. <error string>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the firmwareActivate command failed. The error string value indicates the reason for
failure.
Recommended
Run the firmwareShow command to verify the firmware versions.
Action
Fabric OS Message Reference
53-1002749-01
5
SULB-1041
841