Brocade Communications Systems StoreFabric SN6500B Reference page 624

5
LSDB-1001
LSDB Messages
LSDB-1001
Message
Link State ID <link state ID> out of range.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified link state ID is out of the acceptable range. The valid link state ID is the same
as the valid domain ID, with a range from 1 through 239. The switch will discard the record because it is
not supported.
Recommended
No action is required.
Action
LSDB-1002
Message
Local Link State Record reached max incarnation.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the local link state record (LSR) reached the maximum number of incarnations.
An "incarnation" is a progressive number that identifies the most recent version of the link state record
(LSR). The switch generates its local LSR when first enabled. The incarnation number will begin again at
0x80000001 after reaching 0x7FFFFFFF.
Recommended
No action is required.
Action
LSDB-1003
Message
No database entry for local Link State Record, domain <local domain>.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that there is no local link state record (LSR) entry in the link state database (LSDB). The switch
should always generate its own local entry when starting up.
An "incarnation" is a progressive number that identifies the most recent version of the LSR. The switch
generates its local LSR when first enabled. By disabling and enabling the switch, a new local LSR is
generated.
602
Fabric OS Message Reference
53-1002749-01