Brocade Communications Systems StoreFabric SN6500B Reference page 206

5
BM-1007
Recommended
Configure the blade so that it will persistently enable the ports.
Action
BM-1007
Message
If set, clear EX/VEX/FC Fastwrite configuration for all ports for blade in slot
<Slot number>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the specified blade was detected for the first time after an FR4-18i was previously configured in
the same slot. The new blade requires the specified port configurations to be cleared.
Recommended
No action is required. The blade ports are cleared automatically.
Action
BM-1008
Message
Download of blade firmware failed for blade in slot <slot>. Reissue
firmwaredownload to recover.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the automatic firmware upgrade on the blade failed because the blade firmware version
was detected to be different from the control processor (CP) firmware version.
Recommended
Execute the firmwareDownload command to recover the blade.
Action
BM-1009
Message
Firmwaredownload timed-out for application processor. Faulting switch.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the firmware download on the application processor (AP) blade failed.
Recommended
Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade.
Action
184
Fabric OS Message Reference
53-1002749-01