Brocade Communications Systems StoreFabric SN6500B Reference page 528

5
FW-1358
Recommended
No action is required.
Action
FW-1358
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of authentication failures has risen above the high boundary. Authentication
failures can occur for many reasons. The switch on the other side may not support the protocol, have an
invalid certificate, not be signed properly, or send unexpected packets. The port where authentication
fails is segmented. This counter keeps track of the number of authentication failures.
Recommended
Responses to security-class messages depend on user policies. Consult your security administrator for
Action response strategies and policies.
FW-1359
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of authentication failures has changed from a value outside of the acceptable
range to a value within the acceptable range. Authentication failures can occur for many reasons. The
switch on the other side might not support the protocol, have an invalid certificate, not be signed properly,
or send unexpected packets. The port where authentication fails is segmented. This counter keeps track
of the number of authentication failures.
Recommended
No action is required.
Action
FW-1360
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of Switch Link Authentication Protocol (SLAP) faulty packets has changed.
This counter keeps track of the number of unexpected SLAP packets and SLAP packets with faulty
transmission IDs.
506
Fabric OS Message Reference
53-1002749-01