Brocade Communications Systems StoreFabric SN6500B Reference page 751

SEC-1173
Message
Lost contact with Primary FCS switch.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the
secure fabric. This could result from the primary FCS being disabled.
Recommended
If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Action
SEC-1174
Message
Failed to set <FCS or non-FCS> password.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the fabric configuration server (FCS) or non-FCS password could not be set.
Recommended
Verify all switches in the fabric are in time synchronization with the primary FCS and that no external
Action entity is trying to access the fabric. When verification is complete, retry the operation.
SEC-1175
Message
Failed to install zone data.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the zone database could not be installed on the switch.
Recommended
Verify all switches in the fabric are in time synchronization with the primary FCS and that no external
Action entity is trying to access the fabric. When verification is complete, retry the operation.
Fabric OS Message Reference
53-1002749-01
5
SEC-1173
729