Brocade Communications Systems StoreFabric SN6500B Reference page 809

SPC-3008
Message
S<slot number containing Encryption Engine>, <module name>: SP crypto got READY
notification.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the key application (KPD) within the CryptoModule of the encryption engine has been
started.
Recommended
No action is required.
Action
SPC-3009
Message
S<slot number containing Encryption Engine>, <module name>: FIPS certificate
mismatch, certificate: <FIPS certificate is CO-0 or User-1>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Federal Information Protection Standard (FIPS) certificate within the CryptoModule
does not match that of the node.
Recommended
Zeroize the encryption engine (after backing up any needed primary or secondary KEK), then execute
Action the cryptocfg --initEE and cryptocfg --regEE commands.
SPC-3010
Message
S<slot number containing Encryption Engine>, <module name>: SEK integrity failure
during initialization.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the CryptoModule internal Secret Encryption Key has been corrupted or has not been
initialized.
Recommended
Execute the cryptocfg --initEE and cryptocfg --regEE commands.
Action
Fabric OS Message Reference
53-1002749-01
5
SPC-3008
787