Brocade Communications Systems StoreFabric SN6500B Reference page 494

5
FW-1197
FW-1197
Message
<Port Name> <Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of link resets that the port experiences has fallen below the low boundary level.
Link resets occur due to link timeout errors that indicate no frame activity. A low number of link resets
means that the switch is functioning normally.
Recommended
Respond to this message as is appropriate to the particular policy of the end-user installation.
Action
FW-1198
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of link resets that the port experiences has increased above the high boundary
level. Link resets occur due to link timeout errors that indicate no frame activity. Both physical and
hardware problems can cause link resets to increase.
Recommended
Check both ends of your cable connection. Verify if the cable and small form-factor pluggables (SFPs)
Action are faulty.
FW-1199
Message
<Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of link resets that the port experiences has changed from a value beyond the
acceptable range to a value within the acceptable range. Link resets occur due to link timeout errors that
indicate no frame activity. Both physical and hardware problems can cause link resets to increase.
Recommended
Respond to this message as is appropriate to the particular policy of the end-user installation.
Action
472
Fabric OS Message Reference
53-1002749-01