Brocade Communications Systems StoreFabric SN6500B Reference page 921

ZONE-1039
Message
Unable to read contents of <config file name>: error message <System Error
Message>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Fabric OS cannot read the zone configuration file. Typically, the zone configuration is
too large for the memory available on the switch.
Recommended
Reduce the size of the zone database and retry the operation.
Action
ZONE-1040
Message
Merged zone database exceeds limit.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Fabric OS cannot read the merged zone configuration file. Typically, the zone
configuration is too large for the memory available on the switch.
Recommended
Reduce the size of the zone database and retry the operation.
Action
ZONE-1041
Message
Unstable link detected during merge at port (<Port number>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a possible unstable link or faulty cable.
Recommended
Verify that the small form-factor pluggable (SFP) transceiver and the cable at the specified port are not
Action faulty. Replace the SFP and the cable, if necessary.
Fabric OS Message Reference
53-1002749-01
5
ZONE-1039
899