Brocade Communications Systems StoreFabric SN6500B Reference page 477

FW-1128
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of segmentations has changed from a value outside of the acceptable range to
a value within the acceptable range. Segmentation changes might occur due to the following reasons:
•
•
•
•
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1129
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of zone changes has changed. Zone changes occur when there is a change to
the effective zone configuration.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1130
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur when
there is a change to the effective zone configuration. A low number of zone configuration changes means
that the fabric is functioning normally.
Fabric OS Message Reference
53-1002749-01
Zone conflicts.
Domain conflicts.
Segmentation of the principal link between two switches.
Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
5
FW-1128
455