Brocade Communications Systems StoreFabric SN6500B Reference page 702

5
RPCD-1001
RPCD Messages
RPCD-1001
Message
Authentication Error: client \"<IP address>\" has bad credentials: <bad user name
and password pair>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an authentication error was reported. The specified client IP address has faulty credentials.
Recommended
Enter the correct user name and password from the Fabric Access API host.
Action
RPCD-1002
Message
Missing certificate file. Secure RPCd is disabled.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Secure Sockets Layer (SSL) certificate is missing.
Recommended
To enable remote procedure call daemon (RPCD) in secure mode, install a valid SSL certificate on the
Action switch.
RPCD-1003
Message
Permission denied accessing certificate file. Secure RPCd is disabled.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the Secure Sockets Layer (SSL) certificate file configured on the switch could not be accessed
because root did not have read-level access.
Recommended
Change the file system access level for the certificate file to have root read-level access.
Action
680
Fabric OS Message Reference
53-1002749-01