Brocade Communications Systems StoreFabric SN6500B Reference page 441

FICU-1004
Message
<function name>: Failed to set FICON Management Server (FMS) mode: conflicting PID
Format:<pid_format>, FMS Mode:<mode>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a process ID (PID) format conflict was encountered. The core PID format is required for
fibre connectivity control unit port (FICON-CUP).
The pid_format variable displays the PID format currently running on the fabric, and is one of the
following:
•
•
•
The mode variable displays whether FICON Management Server (FMS) mode is enabled, and is one of
the following: 0 means FMS mode is enabled and 1 means FMS mode is disabled.
Recommended
To enable FMS mode, the core PID format must be used in the fabric. Change the PID format to core PID
Action using the configure command and re-enable FMS Mode using the ficonCupSet command. Refer to the
Fabric OS Administrator's Guide for information on core PID mode.
FICU-1005
Message
Failed to initialize <module>, rc = <error>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that initialization of a module within the fibre connectivity control unit port (FICON-CUP)
daemon failed.
Recommended
Download a new firmware version using the firmwareDownload command.
Action
FICU-1006
Message
Control Device Allegiance Reset: (Logical Path: 0x<PID>:0x<channel image ID>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the path with the specified process ID (PID) and channel image ID lost allegiance to a fibre
connectivity control unit port (FICON-CUP) device.
Fabric OS Message Reference
53-1002749-01
0 - VC-encoded PID format
1 - Core PID format
2 - Extended-edge PID format
5
FICU-1004
419