Brocade Communications Systems StoreFabric SN6500B Reference page 669

PDM-1019
Message
File path or trigger too long.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that one line of the pdm.conf file is too long.
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1020
Message
Long path name (<Path>/<File Name>), Skip.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified file path name is too long. The maximum character limit is 49 characters.
Recommended
Use path names not exceeding 49 characters in length for the files to be replicated.
Action
PDM-1021
Message
Failed to download area port map.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a system call failed.
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
Fabric OS Message Reference
53-1002749-01
5
PDM-1019
647