Brocade Communications Systems StoreFabric SN6500B Reference page 355

FCOE-1023
Message
<portindex>, Too many logins on FCoE controller, max allowed =
<MAX_DEVS_PER_CTLR>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the controller has reached its maximum allowed FCoE login limit.
Recommended
Log out some of the logged-in devices using the fcoe --resetlogin command and then log in a new
Action device. You can view the list of logged-in devices using the fcoe --loginshow command.
FCOE-1024
Message
FDISC received from E_node without prior FLOGI.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a FDISC frame is received from the end node that has not logged in. The end node must
send a fabric login (FLOGI) before it can send an FDISC.
Recommended
It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.
Action
FCOE-1025
Message
FCoE logout received on FIP VN port.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates pre-FIP logout for a device that has logged in using the FCoE Initialization Protocol (FIP).
Recommended
It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.
Action
Fabric OS Message Reference
53-1002749-01
5
FCOE-1023
333