Brocade Communications Systems StoreFabric SN6500B Reference page 433

FICN-1112
Message
DevPrintIng:Auto Sense Data received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Bytes0-0xB=0x<bytes 0-3 of sense
data from the device><bytes 4-7 of sense data from the device><bytes 8-0x0b of
sense data from the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON Printer write pipelining processed sense data from a FICON device.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-1113
Message
DevPrintIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel does not have a
path established to the Control Unit.
Recommended
This is normally an unexpected event; contact your vendor's customer support for assistance.
Action
FICN-1114
Message
DevPrintIng:Device level exception found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID of
the frame that included the Device Level Exception>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active emulation device delivered a Device Level Exception frame to the emulation
processing.
Recommended
If there was an unexpected job failure or I/O Error associated with this event, contact your vendor's
Action customer support for assistance.
Fabric OS Message Reference
53-1002749-01
5
FICN-1112
411