Brocade Communications Systems StoreFabric SN6500B Reference page 345

FABS-1007
Message
<Function name>: Media state is invalid - status=<Status value>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Fabric OS has detected an invalid value in an object status field. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Reboot or power cycle the switch.
Action
If the message persists, run the firmwareDownload command to update the firmware.
FABS-1008
Message
<Function name>: Media oid mapping failed.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Reboot or power cycle the switch.
Action
FABS-1009
Message
<Function name>: type is not media.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Reboot or power cycle the switch.
Action
Fabric OS Message Reference
53-1002749-01
5
FABS-1007
323