Brocade Communications Systems StoreFabric SN6500B Reference page 787

SEC-3038
Message
Event: ipfilter, Status: failed, Info: Failed to activate <IP Filter Policy>
ipfilter policy.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified IP filter policy failed to activate.
Recommended
Verify the security event was planned. If the event was planned, no action is required. If the security
Action event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3039
Message
Event:Security Violation , Status: failed, Info: Unauthorized host with IP address
<IP address of the violating host> tries to establish connection using <Protocol
Connection Type>.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the
message.
Recommended
Check for unauthorized access to the switch through the specified protocol connection.
Action
SEC-3044
Message
The FIPS mode has been changed to <Fips Mode>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates there was a change in the Federal Information Processing Standards (FIPS) mode.
Recommended
Verify the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security policy.
Fabric OS Message Reference
53-1002749-01
5
SEC-3038
765