Brocade Communications Systems StoreFabric SN6500B Reference page 570

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

HIL Messages

Slot <slot number> faulted, <nominal voltage> (<measured voltage>) is above

Message Type

Probable Cause

Indicates that the blade voltage is above threshold.

Replace the faulty blade or switch (for non-bladed switches).

Slot <slot number> faulted, <nominal voltage> (<measured voltage>) is below

Message Type

Probable Cause

Indicates that the blade voltage is below threshold.

Replace the faulty blade or switch (for non-bladed switches).

Blower <blower number> faulted, <nominal voltage> (<measured voltage>) is above

Message Type

Probable Cause

Indicates that the fan voltage is above threshold.

Run the psShow command to verify the power supply status.

Try to reseat the faulty fan field-replaceable units (FRUs) and power supply FRU to verify that they are

seated properly.

If the problem persists, replace the fan FRU or the power supply FRU as necessary.

Fabric OS Message Reference

53-1002749-01

Fabric os v7.1.0