Brocade Communications Systems StoreFabric SN6500B Reference page 428

5
FICN-1097
FICN-1097
Message
HostTeraEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmd=0x<Last 4
commands issued to this device from the channel> LastStatus=0x<Last 4 status
values sent to the channel from this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a Link Level Reject (LRJ) received from a device indicates that the Control Unit has lost the
logical path to the Logical Partition (LPAR).
Recommended
If this was an unexpected event; contact your vendor's customer support for assistance.
Action
FICN-1098
Message
HostTeraIng:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a job was canceled during a Write Tape Pipelining.
Recommended
If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer
Action support for assistance.
FICN-1099
Message
HostTeraIng::FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device> LastCmds=0x<the last 4 commands received from the channel
for this device> LastStatus=0x<the last 4 status values presented to the channel
for this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
406
Fabric OS Message Reference
53-1002749-01