Brocade Communications Systems StoreFabric SN6500B Reference page 521

FW-1342
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of login violations has risen above the high boundary. Login violations indicate
that a login failure has been detected.
Recommended
Execute the errShow command to determine the IP location of the login attempt. Responses to
Action security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
FW-1343
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of login violations has changed from a value outside of the acceptable range to
a value within the acceptable range. Login violations indicate that a login failure has been detected.
Recommended
No action is required.
Action
FW-1344
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of invalid timestamps has changed. Invalid timestamp violations indicate that a
packet with an invalid timestamp has been received from the primary fabric configuration server (FCS).
When the primary FCS downloads a new configuration to other switches in the fabric, the packet is
tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the
difference is too great, it rejects the packet. This counter keeps track of packets rejected due to invalid
timestamps.
Recommended
Responses to security-class messages depend on user policies. Consult your security administrator for
Action response strategies and policies.
Fabric OS Message Reference
53-1002749-01
5
FW-1342
499