Brocade Communications Systems StoreFabric SN6500B Reference page 503

FW-1250
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch transmits has risen above the high
boundary. Transmit performance messages appear due to the number of word frames that travel from
the configured S_ID to the D_ID pair.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1251
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch transmits has changed from a value
outside of the acceptable range to a value within the acceptable range. Transmit performance messages
appear due to the number of word frames that travel from the configured S_ID to the D_ID pair.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1272
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of frame types or commands that the port receives has changed. The port has
received Small Computer System Interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI
Traffic, or IP commands in a frame.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Fabric OS Message Reference
53-1002749-01
5
FW-1250
481