Brocade Communications Systems StoreFabric SN6500B Reference page 384

5
FCR-1063
FCR-1063
Message
Fabric <fabric ID> for switch with domain ID: <domain ID> mismatch with local
fabric ID <local fabric ID>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the fabric ID of the switch does not match the local switch.
Recommended
Run the switchShow command to display the fabric ID. Change the fabric ID to match on both ends by
Action modifying either the local or remote host using the fcrConfigure command.
FCR-1064
Message
Fabric ID of backbone FC-Routers mismatch or overlap.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that either a backbone fabric split and both are connected to a common edge fabric, or the
fabric ID of two backbone fabrics connected to an edge fabric are the same.
Recommended
If the backbone fabric split, merge the fabrics.
Action
If two (or more) backbone fabrics have the same IDs, make the fabric IDs unique using the fcrConfigure
command.
FCR-1065
Message
Fabric on port <port number> was assigned two different fabric IDs.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that another port on the switch is connected to the same edge fabric with a different fabric ID
assignment.
Recommended
Change the port fabric ID to the same value as the other ports connected to the edge fabric using the
Action portCfgExport or portCfgVexport commands.
362
Fabric OS Message Reference
53-1002749-01