Brocade Communications Systems StoreFabric SN6500B Reference page 193

BL-1022
Message
Init Failed: Switch DISABLED because internal ports were not ONLINE, <list of
internal port number not ONLINE>.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the switch initiation failed because one or more of the internal ports was not online. The
switch is faulted.
Recommended
Reboot or power cycle the switch.
Action
Additional fault messages precede and follow this error providing more information. Refer to other error
messages for recommended action.
If the message persists, replace the switch.
BL-1023
Message
Blade in slot <slot number> was reset before blade init completed. As a result the
blade is faulted.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the blade was reset before the initialization completed.
Recommended
Reboot or power cycle the blade using the slotPowerOff and slotPowerOn commands.
Action
If the message persists, replace the blade.
BL-1024
Message
All ports on the blade in slot <slot number> will be reset as part of the firmware
upgrade.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a recent firmware upgrade caused the blade firmware to be upgraded and resulted in the
cold upgrade. As part of the upgrade, all datapath elements were reset.
Recommended
No action is required.
Action
Fabric OS Message Reference
53-1002749-01
5
BL-1022
171