Brocade Communications Systems StoreFabric SN6500B Reference page 761

SEC-1300
Message
This switch is in VcEncode mode. Security is not supported.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the switch is set up with VC-encoded mode.
Recommended
Turn off VC-encoded mode before enabling security.
Action
SEC-1301
Message
This switch is in interop mode. Security is not supported.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the switch is enabled in interop mode.
Recommended
Disable interop mode using the interopMode command before enabling the Secure Fabric OS feature.
Action
SEC-1302
Message
This switch does not have all the required PKI objects correctly installed.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
Action the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
Fabric OS Message Reference
53-1002749-01
5
SEC-1300
739