Brocade Communications Systems StoreFabric SN6500B Reference page 335

Recommended
No action is required.
Action
FABR-1031
Message
Maximum number of retries sending ILS from port <port number> exceeded.
Message Type
LOG | FFDC
Severity
WARNING
Probable Cause
Indicates the fabric exhausted the maximum number of retries sending internal link service (ILS) to the
iswitch daemon on the specified E_Port.
Recommended
Run the top command to see if iswitchd is extremely busy or if another process is using excessive CPU
Action resources.
FABR-1032
Message
Remote switch with domain ID <Domain ID> and switchname <Switchname> running an
unsupported FOS version v2.x has joined the fabric.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric.
Recommended
Remove the switch with the unsupported Fabric OS version 2.x from the fabric
Action
FABR-1034
Message
Area <Area that has already been acquired> have been acquired by port <Port that
has already acquired the area>. Persistently disabling port <Port that is being
disabled>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates you must enable Trunk Area on a port for another port to use the same area.
Recommended
Move the cable to a port area that is not in use, or disable Trunk Area. You must manually enable the port
Action or the port remains disabled forever.
Refer to the Fabric OS Administrator's Guide for more information.
Fabric OS Message Reference
53-1002749-01
5
FABR-1031
313