Brocade Communications Systems StoreFabric SN6500B Reference page 356

5
FCOE-1026
FCOE-1026
Message
FDISC/FLOGI mismatch. FDISC addressed to different FCF than base FLOGI.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the base port has sent a fabric login (FLOGI) but the subsequent FDISC frames that were
received on the switch do not match the original FLOGI.
Recommended
It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.
Action
FCOE-1027
Message
<message> : <mac1>:<mac2>:<mac3>:<mac4>:<mac5>:<mac6>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Fibre Channel Forwarders (FCF) controller is not found for the DA. The end node may
be sending the FLOGI with a wrong DA MAC address.
Recommended
Some parameters are not exchanged correctly between the switch and the end device. Reconfigure the
Action port.
FCOE-1028
Message
<message> : <wwn1>:<wwn2>:<wwn3>:<wwn4>:<wwn5>:<wwn6>:<wwn7>:<wwn8>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the FCoE device with the specified World Wide Name (WWN) is not a member of the login
group.
Recommended
Change the FCoE login group policy on the switch using the fcoelogingroup command so that the
Action device can log in.
334
Fabric OS Message Reference
53-1002749-01