Brocade Communications Systems StoreFabric SN6500B Reference page 544

5
FW-1438
FW-1438
Message
Switch status change contributing factor Missing SFPs: <Number of missing SFPs>
missing SFPs out of <Total number of SFPs> SFPs:config(<Percentage configured>
percent,<Actual threshold limit>). (Port(s) <port list>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of missing small
form-factor pluggable (SFPs) is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended
Execute the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
Action ports.
FW-1439
Message
Switch status change contributing factor Switch offline.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the switch is offline.
Recommended
Execute the switchEnable command.
Action
FW-1440
Message
<FRU label> state has changed to <FRU state>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent.
Recommended
Verify that the event was planned.
Action
522
Fabric OS Message Reference
53-1002749-01