Brocade Communications Systems StoreFabric SN6500B Reference page 812

5
SPM-1001
SPM Messages
SPM-1001
Message
Init fails: <Reason>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the security processor management (SPM) failed to initialize.
Recommended
Check the system resources and restart the switch.
Action
SPM-1002
Message
Generic SPM Warning: <Reason>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an security processor management (SPM) warning based on the reason displayed.
Recommended
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
Action supportSave command and contact your switch service provider.
SPM-1003
Message
Set New Group Cfg SC Enable <SC_Enable> KV Type <KV_Type>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a new group has been configured.
Recommended
No action is required.
Action
790
Fabric OS Message Reference
53-1002749-01