5
SEC-1160
SEC-1160
Message
Duplicate port <port ID> in port list (<port list>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a duplicate port member exists in the specified port list.
Recommended
Verify that there is no duplicate port member in the port list.
Action
SEC-1163
Message
System is already in secure mode. Lockdown option cannot be applied.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the lockdown option was attempted while the fabric is in secure mode.
Recommended
Do not use the lockdown option with the secModeEnable command when a switch is already in secure
Action
mode.
SEC-1164
Message
Lockdown option cannot be applied on a non-FCS switch.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the attempt to enable security is made on a switch that is not present in the fabric configuration
server (FCS) list.
Recommended
Add the switch to the FCS policy list when using the lockdown option to enable security.
Action
SEC-1165
Message
Low memory, failed to enable security on all switches.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the system is low on memory.
726
Fabric OS Message Reference
53-1002749-01