Brocade Communications Systems StoreFabric SN6500B Reference page 195

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

Switch faulted; internal processor was reset before switch init completed.

Message Type

Probable Cause

Indicates that the switch internal processor was reset before the initialization completed.

Reboot or power cycle the switch using the slotPowerOff and slotPowerOn commands.

If the message persists, replace the switch.

All ports on the switch will be reset as part of the firmware upgrade.

Message Type

Probable Cause

Indicates that a recent firmware upgrade caused the switch internal processor firmware to be upgraded

and resulted in a cold upgrade. As part of the upgrade, all the datapath elements were reset.

No action is required.

All GigE/FCIP/Virtualization/FC Fastwrite ports on the switch will be reset as

part of the firmware upgrade.

Message Type

Probable Cause

Indicates that a recent firmware upgrade caused the switch internal processor firmware to be upgraded

and resulted in the cold upgrade. As part of the upgrade, all Gigabit Ethernet, Fibre Channel over IP

(FCIP), virtualization data elements, and FC Fastwrite ports were reset.

No action is required.

Fabric OS Message Reference

53-1002749-01

Fabric os v7.1.0