Brocade Communications Systems StoreFabric SN6500B Reference page 430

5
FICN-1103
FICN-1103
Message
DevTeraIngr:Exceptional Status rcvd on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation
state> status=0x<the exceptional status value>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the status (0x0D or 0x05) indicating the device is going down was received from the device
or error status (including Unit Check 0x02) is received from an active emulation device.
Recommended
The device doing down is a normal event during pipelining and not the unit check. If there are associated
Action I/O error messages with this event, contact your vendor's customer support for assistance.
FICN-1104
Message
DevTeraEgr:Device Ready on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the Teradata device has been initialized and is ready for emulation operations.
Recommended
No action is required.
Action
FICN-1105
Message
DevTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel does not have a
path established to the Control Unit.
Recommended
This is normally an unexpected event; contact your vendor's customer support for assistance.
Action
408
Fabric OS Message Reference
53-1002749-01