Brocade Communications Systems StoreFabric SN6500B Reference page 720

5
SEC-1044
SEC-1044
Message
Duplicate member <member ID> in (<List>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified member is a duplicate in the input list. The list can be a policy list or a switch
member list.
Recommended
Do not specify any duplicates.
Action
SEC-1045
Message
Too many port members.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
Action the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
SEC-1046
Message
Empty list.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
Action the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
698
Fabric OS Message Reference
53-1002749-01