Brocade Communications Systems StoreFabric SN6500B Reference page 670

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

5
PDM-1022
PDM-1022
Message
The switch is configured only with IPv6 addresses.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) cannot synchronize with its peer because the firmware
does not support IPv6.
Recommended
Configure the local switch with IPv4 addresses.
Action
PDM-1023
Message
RADIUS is configured with IPv6 addresses.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) cannot synchronize with its peer because the remote
access dial-in user server (RADIUS) is configured with IPv6 addresses. IPv6 is not supported by older
firmware.
Recommended
Configure RADIUS with IPv4 addresses.
Action
PDM-1024
Message
DNS is configured with IPv6 addresses.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) cannot synchronize with its peer because the Domain
Name Service (DNS) is configured with IPv6 addresses. IPv6 is not supported by older firmware.
Recommended
Configure DNS with IPv4 addresses.
Action
648
Fabric OS Message Reference
53-1002749-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.1.0

Table of Contents