Brocade Communications Systems StoreFabric SN6500B Reference page 424

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

5
FICN-1085
FICN-1085
Message
FICON FCIP Tunnel is Up on GE<Either ge0 or ge1>,tunnel Id=<The configured tunnel
ID (0-7)>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a FICON FCIP tunnel has been established successfully to the peer switch.
Recommended
No action is required.
Action
FICN-1086
Message
FICON FCIP Tunnel is Down on GE<Either ge0 or ge1>,tunnel Id=<The configured
tunnel ID (0-7)>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a FICON FCIP tunnel to the peer switch has been terminated.
Recommended
This is an unexpected event; contact your vendor's customer support for assistance.
Action
FICN-1087
Message
DevTeraEgr:AS Link Level Reject (LRJ) from Chan on Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmd=0x<the Last 4
commands issued to the device> LastStatus=0x<the Last 4 status values received
from the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel indicated in the path issued an Link Level Reject (LRJ) frame for a
sequence from the device.
Recommended
If there was a job failure associated with this event, contact your vendor's customer support for
Action
assistance.
402
Fabric OS Message Reference
53-1002749-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.1.0

Table of Contents