Brocade Communications Systems StoreFabric SN6500B Reference page 880

5
TRCE-1001
TRCE Messages
TRCE-1001
Message
Trace dump available<slot on which the trace dump occurs>! (reason: <cause of
trace dump: PANIC DUMP, WATCHDOG EXPIRED, MANUAL, TRIGGER>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that trace dump files have been generated on the switch or the specified slot. The cause for the
dump can be one of the following:
•
•
•
•
Recommended
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
Action supportSave command and contact your switch service provider.
TRCE-1002
Message
Trace dump<slot on which the trace dump occurs> automatically transferred to
address ' <FTP target designated by user> '.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a trace dump has occurred on the switch or the specified slot, and the trace dump files
were automatically transferred from the switch to the specified FTP server.
Recommended
No action is required.
Action
TRCE-1003
Message
Trace dump<slot on which the trace dump occurs> was not transferred due to FTP
error.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a trace dump has occurred on the switch or the specified slot, but the trace dump files were
not automatically transferred from the switch because of an FTP error such as a wrong FTP address,
FTP site is down, and network is down.
858
PANICDUMP: Generated by panic dump.
WATCHDOG EXPIRED: Generated by hardware watchdog expiration.
MANUAL: Generated manually by issuing the
TRIGGER: Triggered by a specific Message ID generated by CRITICAL RASLog message.
command.
tracedump -n
Fabric OS Message Reference
53-1002749-01