Brocade Communications Systems StoreFabric SN6500B Reference page 916

5
ZONE-1015
ZONE-1015
Message
Not owner of the current transaction <transaction ID>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a zoning change operation is not allowed because the zoning transaction is opened by
another task. Indicates concurrent modification of the zone database by multiple administrators.
Recommended
Wait until the previous transaction is completed. Verify that only one administrator is working with the
Action zone database at a time.
ZONE-1017
Message
FA Zone(<zone name>) contains incorrect number of Initiator and Target devices.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the fabric assist (FA) zoning configuration has more than one initiator. This is because of
incorrect entries in the FA zoning configuration.
Recommended
Edit the zone database to make sure that only one initiator is set for each FA zone configuration.
Action
ZONE-1019
Message
Transaction Commit failed. Reason code <reason code> (<Application reason>) -
\"<reason string>\".
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that reliable commit service (RCS) had a transmit error. RCS is a protocol used to transmit
changes to the configuration database within a fabric.
Recommended
Often this message indicates a transitory problem. Wait a few minutes and retry the command.
Action
Make sure your changes to the zone database are not overwriting the work of another administrator.
Execute the cfgTransShow command to determine if there is any outstanding transaction running on the
local switches.
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
894
Fabric OS Message Reference
53-1002749-01