Brocade Communications Systems StoreFabric SN6500B Reference page 302

5
EM-1008
EM-1008
Message
Unit in <Slot number or Switch> with ID <FRU Id> is faulted, it is incompatible
with the <type of incompatibility> configuration, check FOS firmware version as a
possible cause.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that a blade inserted in the specified slot or the switch (for non-bladed switches) is not
compatible with the platform configuration (includes the firmware version) or the switch configuration.
The blade is faulted.
Recommended
If the blade is incompatible, upgrade the firmware or replace the blade and make sure the replacement
Action blade is compatible with your control processor (CP) type and firmware.
If the incompatibility is with the logical switch configuration, change the configuration by using the lscfg
command to be consistent with the blade type, or remove the blade.
EM-1009
Message
<FRU Id> powered down unexpectedly.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that the environmental monitor (EM) received an unexpected power-down notification from the
specified field-replaceable unit (FRU). This may indicate a hardware malfunction in the FRU.
Recommended
Reseat the FRU. If the problem persists, replace the FRU.
Action
EM-1010
Message
Received unexpected power down for <FRU Id> But <FRU Id> still has power.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that the environmental monitor (EM) received an unexpected power-down notification from the
specified field-replaceable unit (FRU). However, the specified FRU still appears to be powered up after
four seconds.
Recommended
Reseat the blade. If the problem persists, replace the blade.
Action
280
Fabric OS Message Reference
53-1002749-01