Brocade Communications Systems StoreFabric SN6500B Reference page 425

FICN-1088
Message
DevTeraEgr:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for the device> tflags=0x<the current emulation tera control flags for the
device> sflags=0x<the current emulation status control flags for the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
If there was an unexpected job failure associated with this event, contact your vendor's customer support
Action for assistance.
FICN-1089
Message
DevTeraEgr:FICON Tera Cancel:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
If there was an unexpected job failure associated with this event, contact your vendor's customer support
Action for assistance.
FICN-1090
Message
DevTeraEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tera control flags for the device>
sflags=0x<the current emulation status control flags for the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Selective Reset for a device that was active in emulation.
Recommended
If there was an unexpected job failure associated with this event, contact your vendor's customer support
Action for assistance.
Fabric OS Message Reference
53-1002749-01
5
FICN-1088
403