Brocade Communications Systems StoreFabric SN6500B Reference page 391

FCR-1084
Message
The resume retry count is exhausted for the domain <Domain>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the resume
message which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been the result of this issue.
Recommended
No action is required.
Action
FCR-1085
Message
HA sync lost as remote CP does not support FCR based matrix.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the remote control processor (CP) has older firmware, which does not support the
FCR-based matrix while the local CP has the feature enabled. This is causing the loss of the high
availability (HA) synchronization.
Recommended
Disable the FCR-based matrix or upgrade the remote CP.
Action
FCR-1086
Message
HA sync lost as remote CP does not support 8 Gbps-capable FC based EX_Ports.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the remote control processor (CP) has older firmware, which does not support 8
Gbps-capable FC based EX_Port. This is causing the loss of the high availability (HA) synchronization.
Recommended
Disable 8 Gbps-capable FC based EX_Ports or upgrade the remote CP.
Action
Fabric OS Message Reference
53-1002749-01
5
FCR-1084
369