Brocade Communications Systems StoreFabric SN6500B Reference page 850

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

5
SULB-1009
TABLE 7
Status message
"Sanity check failed because HAMD is disabled on active CP."
"Sanity check failed because firmware download process is already in progress."
"Sanity check failed because Fabric OS is disabled on standby CP."
"Sanity check failed because HAMD is disabled on standby CP."
"Firmware download failed on standby CP."
"Firmware download failed on standby CP."
"Firmware download failed on standby CP."
"Firmware commit failed on standby CP."
"Firmware download failed."
"Firmware download failed due to IPC error."
"Unable to check the firmware version on standby CP due to IPC error."
"Firmware download failed due to IPC error."
"Firmware download failed due to IPC error."
"Standby CP failed to reboot due to IPC error."
"Firmware commit operation failed due to IPC error."
"Unable to check the firmware version on standby CP due to IPC error."
"Unable to restore the original firmware due to standby CP timeout."
"Standby CP failed to reboot and was not responding."
"Unable to check the firmware version on standby CP due to IPC error."
"Sanity check failed because the firmware download operation is already in
progress."
"Sanity check failed because the firmware download operation is already in
progress."
NOT USED
"System error."
"Active CP forced failover succeeded. Now the standby CP becomes active CP."
"Standby CP booted up."
"Active and standby CP failed to gain HA synchronization within 10 minutes."
"Standby CP rebooted successfully."
"Standby CP failed to reboot."
"Firmware commit has started to restore the secondary partition."
"Local CP is restoring its secondary partition."
"Unable to restore the secondary partition. Run the
and
"Firmware download has started on standby CP. It might take up to 10 minutes."
"Firmware download has completed successfully on standby CP."
"Standby CP reboots."
828
Status messages and status codes (Continued)
firmwareShow
commands to see firmware status."
firmwareDownloadStatus
Fabric OS Message Reference
Status code
0x34
0x35
0x36
0x37
0x40
0x41
0x42
0x43
0x44
0x50
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x60
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6a
0x6b
0x6c
0x6d
0x6e
53-1002749-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.1.0

Table of Contents